QRP S-Pixie (unbuilt) kit Plexi case and your choice of crystal.
qrp transceiver kit
Descriptions
QRP Pixie (unbuilt) kit Plexi case and your choice of crystal 7.023/30/35/40/50/55/60/122
Size:
82mm * 66mm * 48mm
Supply voltage:
DC 9~13.8V
Transmit power:
1.2W
Antena:
50 Ohm, 7MHz, SWR<2.0
Frequency:
7.023MHz / 7.030MHz / 7.050MHz (40 meter)
Work mode:
CW
Auto transmits, Auto key:
No
Sidetone:
Buzzer generation
1. Introduction.
“PIXIE” is a very small volume of simple 40-meter band micro-power amplitude telegraph
transceiver, Despite its small size and DC receiver limitations, it is capable of working
several hundred miles when connected to a good 40-meter antenna.
Improvements are as follows:
The vertical resistance is changed to horizontal resistance, Solving the problem of
resistance to short circuits.
We do not distinguish between positive and negative electrodes of the power supply. The power input range increased to 13.8V.
An added buzzer sounds for sending (use jumper shield), and Added led signal for sending.
Added acrylic shell.
2. Specifications.
Power supply: 9~13.8V Volts DC, >500mA (Recommend the use of batteries).
Antenna: 50ohm,7MHz, SWR<2.0
Receive: static current 20mA
Transmission power:
1.2W
Frequency: launch the vibration frequency,7023 kHz
Receives the local oscillator frequency: about 7023-7023 kHz
Work mode:
CW
KEY:
Case: Acrylic
Add a review